This page explains how to use the SKMEI 9184 Square Skeleton Automatic Watch. It is an automatic mechanical watch: it has no battery and runs on the movement of your wrist.
The Crown Positions
- Pushed in: normal position. The watch runs and you can wind it by turning the crown clockwise.
- Pulled out: sets the time.
Start and Wind the Watch
- With the crown pushed in, turn it clockwise about 20 to 30 times. You will feel a light resistance; that is normal.
- Set the time (next section) and put the watch on. Wearing it during the day keeps it wound.
- If it stops after a day or two off the wrist, wind it again and reset the time. Nothing is wrong with it.
A mechanical watch can gain or lose some seconds a day. That is expected for this kind of movement.
Set the Time
- Pull the crown out until it clicks.
- Turn it until the hands show the right time.
- Push the crown all the way back in.
Water Resistance
The watch is rated 3 Bar: fine for rain and splashes. Take it off to shower, swim or wash dishes, and never pull the crown when it is wet.
Strap and Care
To size the strap or bracelet, follow our strap adjustment guide. For cleaning and storage, see how to look after your watch.
Something on your watch does not match this page? Write to us through the contact page with the model number and we will help.
